Hitachi SPX-WKT2 - Page 16

• If this remote controller is connected to the indoor unit,
you cannot set the mer operaon at the wireless remote
controller.
Timer lamp indicaon of
indoor unit
OFF
ON
OFF
OFF
The kind of Timer operaon
Simple mer
Sleep mer
Weekly mer
Day mer of leave home
NOTE for Timer Operaon
• The mer lamp indicaon of indoor unit when the mer
operaon set in this remote controller.
– Fan/Cooling/Dehumidifying and leave home cannot
operate at the same me. The first-run unit has a priority
and other units in different mode will be in standby mode.
– Heang operaon can be used with leave home.
– When two or more rooms are set to operate leave home,
the temperature set by leave home may not be reached. It
also depends on outdoor temperature.
• Aer reaching the set number of operaon days for leave
home or leave home operaon is canceled, the unit will
operate in previous mode.
• Powerful and Eco operaons are not applicable during
leave home operaon.
• For mul connecon:
NOTE
• During leave home operaon, fan speed and air deflector's
posion cannot be changed.
• When leave home operaon is started, implementaon of
"Simple mer" or "Weekly mer" is canceled.
• Change to other operaon mode.
Press "" and select "MODE". By pressing "" or "",
the leave home operaon will be canceled and the
operaon mode is changed.
• Select "Leave Home" from the menu and press "OK".
The confirmaon screen will be displayed.
Select "Yes" by pressing "" or "" and press "OK". Or
• Press " " (START/STOP). Or
5.5.3 To cancel leave home operaon
4 Set the temperature by pressing "" or "".
Temperature range can be set between 10°C and 16°C.
Keep pressing and the value will change more quickly.
- 16 -
ex. Select heang mode