Hitachi SPX-WKT2 - Page 14

NOTE
• The default seng of this seng is "ON".
• When the seng of schedule operaon is invalid, the
schedule operaon will not be acvated.
• If "Leave Home" operaon is started, "Schedule ON/OFF"
seng will be automacally changed to "OFF".
" " will be turned on when the seng of schedule
operaon is valid.
" " will be turned off when the seng of schedule
operaon is invalid.
3 Select "Yes" by pressing "" or "" and press "OK".
The holiday seng will be confirmed and the screen will
return to the normal mode.
2 Select "Schedule ON/OFF" by pressing "" or "" and
press "OK". The confirmaon screen will be displayed.
1 Select "Weekly Timer" from the menu and press "OK".
This funcon is used to deacvate the schedule operaon
temporarily.
The schedule operaon will not be carried out when "OFF"
is set in this funcon.
This funcon is used to apply for long period of holidays.
5.4.4 Schedule ON/OFF seng
NOTE
• " " will be turned off when the holiday seng is acvated.
4 Select "Yes" by pressing "" or "" and press "OK".
The holiday seng will be confirmed and the screen will
return to the normal mode.
3 Press “OK” aer the seng is completed. The confirmaon
screen will be displayed.
" " and " " will be changed to " " and " " on LCD.
2 Select the day of the week to stop the operaon by pressing
"" or "".
Select "HOL. ON/OFF" by pressing ""or "".
1 Select "Weekly Timer" from the menu and press "OK".
Select "Holiday Seng" by pressing "" or "" and press
"OK".
"Holiday Seng" screen will be displayed.
This funcon is used to deacvate the schedule operaon
temporarily.
This funcon is used to deacvate the schedule operaon
just for one day. Aer that, the schedule operaon will
recover automacally.
This funcon is used to set irregular schedules such as
naonal holidays.
5.4.3 Holiday seng
- 14 -