Hitachi UX Twin Nozzle - Page 25

23
Holding Register data configuration (9/13)
Word
address
Classification Item name Setting range Content
24 98
Date / time
setup
Current time(year) 2000 to 2099
Sets the current time.
24 99 Current time(month) 1 to 12
24 9A Current time(day) 1 to 31
24 9B Current time(hour) 0 to 23
24 9C Current time(minute) 0 to 59
24 9D Current time(second) 0 to 59
24 9E Calendar time control 0 , 1
Sets the calendar time control.
0:same as current time
1:clock stop
24 9F Calendar time(year) 2000 to 2099
Sets the calendar time.
24 A0 Calendar time(month) 1 to 12
24 A1 Calendar time(day) 1 to 31
24 A2 Calendar time(hour) 0 to 23
24 A3 Calendar time(minute) 0 to 59
24 A4 Calendar time(second) 0 to 59
24 A5 Clock system 0 , 1
Sets the clock system.
0:24-hour clock , 1:12-hour clock
24 A6 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
24 AF Reserve_10
24 B0
User
environment
setup
(Future
subject)
Repeat print sensor mode 0 , 1
Sets the repeat print sensor mode.
0:signal ON , 1:OFF-ON transition
24 B1 Change Character orientation 0 to 3
Sets the change character
orientation.
0:Disable
1:Reverse direction printing
2:normal or inverted
3:Character orientation 0 or 3
24 B2 Change mode 0 , 1
Sets the change mode.
0: OFF=normal/forward
1: OFF=inverted/reverse
24 B3 Reverse print 0 , 1
Sets the reverse print.
0:right-justified , 1:left-justified
24 B4 Print signal type 0 , 1
Sets the print signal type.
0:print.complete
1:print.-in-progress
24 B5 Print data changeover error 0 , 1
Sets the print data changeover
error.
0:Disable , 1:Enable
24 B6 Char. Size menu 1 0 , 1
Sets the Char. Size menu 1.
0:5x8 , 1:5x7
24 B7 Char. Size menu 2 0 , 1
Sets the Char. Size menu 2.
0:9x8 , 1:9x7
24 B8 Excitation V-ref. warning 0 , 1
Sets the excitation V-ref. warning.
0:Disable , 1:Enable
24 B9 Print characters one by one 0 , 1
Sets the print characters one by
one.
0:Disable , 1:Enable
24 BA
Continue message print
(Function item for SOP-15-20)
0 , 1
Sets the continue message print.
0:Disable , 1:Enable
24 BB
Start message number
(Function item for SOP-15-20)
0 to 2000
Sets the number of registered print
message to be printed.
24 BC
End message number
(Function item for SOP-15-20)
0 to 2000
24 BD Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
25 7F Reserve_195