Hitachi UX Twin Nozzle - Page 31

29
Input Register data configuration (2/9)
Word
address
Classification Item name Setting range Contents
00 2C
Unit
information
Input mode 1 , 2
Gets the input mode.
1:Default , 2:Local Language
00 2D
Maximum message length
(Characters)
500
Gets the maximum message
length (Characters).
00 2E Maximum registers 2000 Gets the maximum registers.
00 2F 2D code print 1
Gets the 2D code print.
1:supported
00 30 Character size 0x0007
Gets the Settable sizes.
Bit information is obtained for
availability of Character size of 4x5
or 18x24 or 24x32.
0x0001:4x5, 0x0002:18x24
0x0004:24x32
00 31
Maximum calendar/count
block count
8
Gets the maximum calendar/count
block count.
00 32 Replacement items 99 Gets the replacement items.
00 33 Shift code/Time count 1
Gets the shift code/time count.
1:supported
00 34 Chimney/DIN print 1
Gets the chimney/DIN print.
1:supported
00 35 Maximum column 4 Gets the maximum column.
00 36 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
… …
00 4F Reserve_26
00 50
Operation
management
Ink operating time 0 to 9999 Gets the ink operating time.
00 51 Ink alarm time 0 to 9999 Gets the ink alarm time.
00 52
Print count 0 to 999999999 Gets the print count.
00 53
00 54
Cumulative operation time 0 to 999999
Gets the cumulative operation
time.
00 55
00 56 Ink/makeup ink type 1 to 999 Gets the ink/makeup ink type.
00 57 Ink viscosity 0 to 999 Gets the ink viscosity.
00 58 Ink pressure (nozzle 1) 0 to 999
Gets the ink pressure.
Ink pressure multiplied by 1000 is
obtained.
(Example : 255 = 0.255 MPa)
00 59 Ambient temperature -99 to 100 Gets the ambient temperature.
00 5A Deflection voltage (nozzle 1) 0 to 99
Gets the deflection voltage.
Deflection Voltage multiplied by 10
is obtained.
(Example : 57 = 5.7 kV)
00 5B Excitation V-ref. (nozzle 1) 0 to 27 Gets the excitation V-ref.
00 5C Excitation frequency 0 to 1000
Gets the excitation frequency.
Excitation frequency multiplied by
10 is obtained.
(Example : 689 = 68.9 kHz)
00 5D Reserve_1
"Reserve" is not initially provided,
but may be added in future.
00 5E Reserve_2
00 5F Ink pressure (nozzle 2) 0 to 999
Gets the ink pressure.
Ink pressure multiplied by 1000 is
obtained.
(Example : 255 = 0.255 MPa)
00 60 Deflection voltage (nozzle 2) 0 to 99
Gets the deflection voltage.
Deflection Voltage multiplied by 10
is obtained.
(Example : 57 = 5.7 kV)
00 61 Excitation V-ref. (nozzle 2) 0 to 27 Gets the excitation V-ref.