Hitachi VM-2300A User Manual

P
£2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER — SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION:
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
AN
AN
This symbol! warns the user that uninsulated voltage within
the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of con-
tact with any inside part of this unit.
This symbol alerts the user that important literature con-
cerning the operation and maintenance of this unit has
been included. Therefore, it should be read carefully in
order to avoid any problems.
TO
PREVENT
ELECTRIC
SHOCK
DO
NOT
USE
THIS
(POLARIZED)
PLUG
WITH
AN
EXTENSION
CORD,
RECEPTACLE
OR
OTHER
OUTLET
UNLESS
THE
BLADES
CAN
BE
FULLY
INSERTED
TO
PREVENT BLADE EXPOSURE.
MOISTURE
Moisture may occur if the video camera/recorder is
moved from a cold area to a warm humid area. A
flashing “ POWER” light indicates that moisture is on
the recorder mechanism, which could result in tape
damage. When the “POWER” light is flashing the
unit will not operate. When this happens, press the
“EJECT” button, remove the tape, and wait for the
moisture to dry ..... the. “POWER” indicator will
stop flashing.
RECAUTIONS
No water, dust or sand
Be careful that no water, dust or sand enters the
camera/recorder.
The solid-state image sensor is basically immune to
direct sunlight or excessively bright objects, but,
avoid prolonged exposure.
When you are not using the camera/recorder, switch
off the power and attach the lens cap.
When you shoot at a scene which contains an ex-
tremely bright object such as the sun or a light
source, a bright vertical bar may appear in the
picture.
Your camera/recorder is functioning properly, but
This
digital
apparatus
does
not
exceed
the
Class
B
limits
for
radio
noise
emissions
from
digital
apparatus
set
out
in
the
Radio
Interference
regulations
of the
Canadian
Department
of
Communications.
“POWER” Light
the solid-state pickup device (C.C.D) usually causes
this as an inherent characteristic. Try to avoid shoot-
ing an excessive bright object directly.
Be sure not to leave it in a place where the
temperature exceeds 120°F, or the pickup device may
be damaged.
Dangerous includes:
e Inside a car with the windows closed and in direct
sunshine.
e Near heating appliances.
Do not leave the viewfinder lens facing sunlight for
a prolonged period, or the phosphorescent surface of
the cathode ray tube may be damaged.

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English