Hitachi VM-2300A User Manual

AUTO FOCUS
Auto Focus Window
The auto focus system utilizes
infrared light and will focus on
the nearest object that reflects
this light.
Auto focusing can be also per-
formed during manual focus
mode by pushing this button. FOCUS
PUSH-AUTO MAN ee AUTO
With the “FOCUS AUTO/MAN” switch set to “AUTO” position, ordinary objects are automatically in optimum
focus.
m OBJECTS HARD TO AUTO FOCUS
The distance between the auto focus window and the object is measured, and the focus ring is automatically turned
for focusing. However, with the scenes such as shown below, the auto focusing may not operate properly, and
manual focus must be performed. See next page.
1, Object is not in the 2. Object in far and near 3. Object with continuous — 4. Object behind glass.
center. positions at the same - variation from far to
: time. near positions.
5..Black object or water 6. Object always moving 7. Object in the snow or 8. Objects with equal
which does not reflect such as a crowd. fog. pitches.
_ infrared light.
E23

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English