Hitachi VM-2300A User Manual

AUDIO DUBBING
The
audio
dubbing
feature
lets
you
record
new
audio
(sound)
on
a
previously
recorded
tape
without
erasing
the
original
video
(picture).
When
you
audio
dub
a
tape,
the
previous
audio
is
erased
and
replaced
with
new
sound.
To “AUDIO IN”
“VIDEO IN” (White)
(Yellow) To “AV IN” {
foe
Video/Audio Output Cord
Video/Audio Input Cord To “AUDIO OUT”
(Optional Accessory) (White)
NOTES:
©
Sound
from
the
built-in
microphone,
external
microphone
and
the
AV
IN
jack
can
be
dubbed.
¢
Do
not
connect
the
“AV
IN”
jack
when
dubbing
audio
from
the
external
microphone
or
built-in
micro-
phone.
Connecting
an
external
microphone
also
switches
off
the
built-in
microphone
automatically.
e
Disconnect
the
external
microphone
when
dubbing
audio
from
“AV
IN”
jack.
1. Insert a recorded tape.
Be sure that the record safety tab is not missing. “VCR/CAM” Select Switch
2.
Slide
““VCR/CAM"
select
switch
to
““VCR”.
“PLAY”
Button
3. Play the tape and press ‘STILL (REC/PAUSE)”
button where you want to dub audio. “STOP” Button
© The camera/recorder enters the still play mode. “STILL (REC/PAUSE)”
4. Press “AUDIO DUB” and “PLAY” buttons at the Button
same time.
© “A.DUB” appears in the viewfinder.
5. Press “STILL (REC/PAUSE)” button to start audio
dubbing.
6. Press “STOP” button to stop audio dubbing.
NOTE: If counter memory “M” appears in the view-
finder, the tape stops automatically at the reading of
“0:00:00” and audio dubbing stops.
NOTE: You can also dub both the video and audio
simultaneously if desired. To do so, press “AUDIO
DUB” and “PLAY” buttons first, then press
“VIDEO DUB” and “PLAY” buttons in step 4
above.
E34

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English