Hitachi VM-2300A User Manual

POWER SOURCES
g@ WHEN USING WITH THE BATTERY (Accessory No. 2)
1. To attach align the mark “"®’ on the side of the
battery with that on the rear left side of the camera/
recorder so that the battery fits into the grooves, and
slide the battery downward, as illustrated.
Mark “>” Battery
2. To remove slide the battery upward while sliding the
“BATTERY” release lever in the direction of the
arrow.
“BATTERY” Release Lever
@ WHEN USING WITH THE AC ADAPTOR/CHARGER (Accessory No. 3)
See the rating label of the AC adaptor/charger.
1. To attach align the mark “>” on the side of the AC
adaptor/charger with that on the rear left side of the
camera/recorder so that it fits into the grooves, and
slide the AC adaptor/charger downward as il-
lustrated.
2. Plug the AC adaptor/charger power cord into AC
electrical outlet, and the “POWER” light will come
Mark “>”
3. To remove slide the AC adaptor/charger upward
while holding the “BATTERY” release lever in the
direction of the arrow. ;
NOTES:
e The AC adapitor/charger cannot charge the battery
and operate the camera/recorder at the same time.
Remove the battery from the AC adaptor/charger to
supply power to the camera/recorder.
e When using the AC adaptor/charger to power the
camera/recorder, the battery level indicator may dis-
play “E-—". This indicator is used for battery
operation and has no meaning when using the AC
adaptor/charger to power the camera/recorder.
E9

Hitachi VM-2300A Specifications

General

Brand	Hitachi
Model	VM-2300A
Category	Camcorder
Language	English