Hitachi WL200 Series - Page 46

44
The following table shows the available analog input settings. Parameter  and the
input terminal [AT] determine the External Frequency Command input terminals that are
available, and how they function. The analog inputs [O] and [OI] use terminal [L] as the
reference (signal return).

[AT] Input
Analog Input Configuration

ON
[OI]
OFF
[O]

ON
Integrated POT on external panel
OFF
[O]

ON
Integrated POT on external panel
OFF
[OI]
Other Analog Input-related topics:
 “Analog Input Settings”
 “Additional Analog Input Settings”
 “Analog Signal Calibration Settings”
 “Analog Input Current/Voltage Select”
 “ADD Frequency Enable”
 “Analog Input Disconnect Detect”