Hitachi X200 Series - F Group: Main Profile Parameters

- 12 -
Parameter tables for user-settable functions follow these conventions:
y Some parameters have 2nd motor equivalents, indicated by the x2xx
parameter codes in the left-most column.
y Some parameters specify an option code. Where applicable, the option codes
will be in a bulleted list in the Name/Description column.
y The default values apply to all models unless otherwise noted for each
parameter… -FE (Europe) / -FU (U.S.) / -FR (Japan).
y Some parameters cannot be edited during Run Mode, and certain Software
Lock settings (b031) can prohibit all edits. If in doubt, place the inverter in
Stop Mode or Consult the inverter manual for details.
“F” group: Main Profile Parameters
Func.
Code
Name / Description
Default value
-FE/FU
Set
value
F001 Output frequency setting 0.0
F002 Acceleration (1) time setting 10.0
F202 Acceleration (1) time setting
<2
nd
motor>
10.0
F003 Deceleration (1) time setting 10.0
F203 Deceleration (1) time setting
<2
nd
motor>
10.0
F004 Keypad Run key routing
y 00 Forward y 01 Reverse
00