Hitachi X200 Series Quick Reference Guide

- 1 -
Caution: Be sure to read the X200 Manual and the X200 Manual
Addendum, and follow their Cautions and Warnings for the initial
product installation. This Quick Reference Guide is intended for
reference use by experienced users in servicing existing installations.
Power Circuit Terminals
Inverter models X200-002SFEF/NFU, -004SFEF/NFU
Inverter models X200-005SFEF, -007SFEF/NFU to -022SFEF/NFU,
-037LFU to -075LFU, 004HFEF/HFU to –075HFEF/HFU
Caution: Power terminal assignment is is different compared to old
models such as L100, L200 series. Pay attention when wiring the
power cable.
!
!
Jumper
U/T1
V/T2
W/T3
- + +1
L1
/ N
Jumper
SFEF
L1
L2
L3/N
Jumper
NFU
L1
/ N
U/T1
V/T2
W/T3
- + +1
Jumper
Jumper
L1
L2
L3/N
Jumper
R/L1
S/L2
T/L3
Jumper
SFEF
NFU,LFU
HFEF,HFU

Hitachi X200 Series Specifications

General

Series	X200
Output Frequency	0-400 Hz
Cooling Method	Fan Cooled
Type	Inverter
Control Method	V/F control
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Communication	RS485, Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Ambient Temperature	-10°C to +50°C
Humidity	5 to 95% RH (Non-condensing)
Enclosure Rating	IP20
Operating Temperature	-10°C to +40°C
Storage Temperature	-20°C to +60°C