Hitachi X200 Series - Page 120

“B” Function Defaults
Func.
Code
Name /
SRW Display
Description
Run
Mode
Edit
-FE
(EU)
-FU
(USA)
Units
Software lock mode selectionB031
S-Lock MD1
Prevents parameter changes, in
four options, option codes:
00}all parameters except B031
are locked when [SFT]
terminal is ON
01}all parameters except B031
and output frequency F001
are locked when [SFT]
terminal is ON
02}all parameters except B031
are locked
03}all parameters except B031
and output frequency F001
are locked
10}High level access including
B031
See appendix C for the accessible
parameters in this mode.
U
01 01

NOTE: To disable parameter editing when using B031 lock modes 00 and 01, assign the
[SFT] function to one of the intelligent input terminals.
See “Software Lock” on page 4-21.
Configuring Drive
Parameters
337
3
−
37
&RQ¿JXULQJ'ULYH
Parameters