Hitachi X200 Series User Manual

Introduction
This appendix lists the user-programmable parameters for the X200 series inverters
and the default values for European and U.S. product types. The right-most column of
the tables is blank, so you can record values you have changed from the default. This
involves just a few parameters for most applications. This appendix presents the
parameters in a format oriented toward the keypad on the inverter.
Parameter Settings for Keypad Entry
X200 series inverters provide many functions and parameters that can be configured by
the user. We recommend that you record all parameters that have been edited, in order
to help in troubleshooting or recovery from a loss of parameter data.
Main Profile Parameters
NOTE:. Mark “9” in B031=10 shows the accessible parameters when B031 is set “10”,
high level access.
“F” Group Parameters Default Setting
Func.
Code
Name
-FE
(EU)
-FU
(USA)
B031
=10
User
Setting
F001 Output frequency setting 0.0 0.0
9
F002 Acceleration (1) time setting 10.0 10.0
9
F202 Acceleration (1) time setting,
2nd motor
10.0 10.0
9
F003 Deceleration (1) time setting 10.0 10.0
9
F203 Deceleration (1) time setting,
2nd motor
10.0 10.0
9
F004 Cumulative power-on time
monitor
00 00
U
Inverter model X200
MFG. No.
This information is printed
on the specification label
located on the right side o
f
the inverter
C2
Appendix C
C
−
2
Appendix C

Hitachi X200 Series Specifications

General

Series	X200
Output Frequency	0-400 Hz
Cooling Method	Fan Cooled
Type	Inverter
Control Method	V/F control
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Communication	RS485, Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Ambient Temperature	-10°C to +50°C
Humidity	5 to 95% RH (Non-condensing)
Enclosure Rating	IP20
Operating Temperature	-10°C to +40°C
Storage Temperature	-20°C to +60°C