Safety—General Precautions
OUT1739,00001B3 –19–05AUG02–1/1
Recognize Safety Information
T133555 –UN–28AUG00T133588 –19–28AUG00
This is the safety alert symbol. When you see this
symbol on your machine or in this manual, be alert
for the potential of personal injury.
Follow the precautions and safe operating practices
highlighted by this symbol.
A signal word — DANGER, WARNING, or CAUTION — is
used with the safety alert symbol. DANGER identifies the
most serious hazards.
On your machine, DANGER signs are red in color,
WARNING signs are orange, and CAUTION signs are
yellow. DANGER and WARNING signs are located near
specific hazards. General precautions are on CAUTION
labels.
TX14740,0000019 –19–10JAN07–1/1
Follow Safety Instructions
Read the safety messages in this manual and on the
machine. Follow these warnings and instructions
carefully. Review them frequently.
Keep safety signs in good condition.
Be sure new equipment components and repair parts
include the current safety signs.
Be sure all operators of this machine understand every
safety message. Replace operator’s manual and safety
signs immediately if missing or damaged. Replacement
safety signs are available from your authorized dealer.
OUT1739,00001B5 –19–16JUN06–1/1
Operate Only If Qualified
Do not operate this machine unless you have read the
operator’s manual carefully and you have been
qualified by supervised training and instruction.
Familiarize yourself with the job site and your
surroundings before operating. Try all controls and
machine functions with the machine in an open area
before starting to work.
Know and observe all safety rules that may apply to
your work situation and your work site.
1-2-1 081407
PN=8
To Next Page
Loading...
Need help?
General
