Contents
Page Page
Safety—Safety Features
Operation—Operator’s Station
Safety Features ........................ 1-1-1
Pedals, Levers, and Panels ............... 2-1-1
Control Lever Switches
Safety—General Precautions
Road Builder— ....................... 2-1-2
Recognize Safety Information.............. 1-2-1
Live Heel Grapple— ................... 2-1-2
Follow Safety Instructions................. 1-2-1
Articulated Grapple Valve In Head ........ 2-1-3
Operate Only If Qualified ................. 1-2-1
Monitor Panel .......................... 2-1-3
Wear Protective Equipment ............... 1-2-2
Monitor Panel Functions.................. 2-1-4
Avoid Unauthorized Machine Modifications.... 1-2-2
Front Switch Panel ...................... 2-1-5
Inspect Machine ........................ 1-2-2
Front Switch Panel Functions .............. 2-1-6
Stay Clear of Moving Parts................ 1-2-3
Switch Panel .......................... 2-1-7
Avoid High-Pressure Fluids ............... 1-2-3
Pilot Control Shut-Off Lever ............... 2-1-7
Avoid High-Pressure Oils ................. 1-2-4
Horn ................................. 2-1-8
Beware of Exhaust Fumes ................ 1-2-4
Power Boost Switch ..................... 2-1-9
Prevent Fires .......................... 1-2-5
Travel Alarm and Travel Alarm Cancel
Prevent Battery Explosions................ 1-2-5
Switch—If Equipped .................. 2-1-10
Handle Chemical Products Safely........... 1-2-6
Cab Heater and Air Conditioner— Side
Dispose of Waste Properly ................ 1-2-6
Entry Cab .......................... 2-1-11
Prepare for Emergencies ................. 1-2-6
Cab Heater and Air Conditioner—Rear
Entry Cab .......................... 2-1-13
Safety—Operating Precautions
Operating the AM/FM Radio .............. 2-1-13
Use Steps and Handholds Correctly......... 1-3-1
Side Entry Cab Door Handles ............ 2-1-14
Start Only From Operator’s Seat ........... 1-3-1
Side Entry Cab Door Release Lever........ 2-1-14
Use and Maintain Seat Belt ............... 1-3-1
Rear Entry Cab Door Handles ............ 2-1-15
Prevent Unintended Machine Movement ..... 1-3-2
Secondary Exit ........................ 2-1-16
Avoid Work Site Hazards ................. 1-3-3
Adjusting the Seat ..................... 2-1-17
Keep Riders Off Machine ................. 1-3-3
Fire Extinguisher ...................... 2-1-18
Avoid Backover Accidents ................ 1-3-4
Hydraulic Oil Tank Pressure Vent.......... 2-1-19
Avoid Machine Tip Over .................. 1-3-4
Use Special Care When Lifting Objects ...... 1-3-5
Operation—Operating The Machine
Add and Operate Attachments Safely........ 1-3-5
Keep the Operator Protective Structure
Before Starting Work .................... 2-2-1
(OPS) in Place ....................... 1-3-6
Operator’s Daily Machine Check Before
Starting ............................. 2-2-1
Starting Engine......................... 2-2-2
Safety—Maintenance Precautions
Starting In Cold Weather ................. 2-2-4
Park and Prepare for Service Safely ........ 1-4-1
Service Cooling System Safely............. 1-4-1
Cold Weather Warm-Up .................. 2-2-5
Remove Paint Before Welding or Heating .... 1-4-2
Travel Pedals and Levers................. 2-2-6
Make Welding Repairs Safely.............. 1-4-3
Control Levers—Road Builder ............. 2-2-7
Drive Metal Pins Safely .................. 1-4-3
Control Levers—Live Heel Grapple ......... 2-2-9
Control Levers—Processor ............... 2-2-11
Safety—Safety Signs
Safety Signs ........................... 1-5-1 Continued on next page
All information, illustrations and specifications in this manual are based on
the latest information available at the time of publication. The right is
reserved to make changes at any time without notice.
COPYRIGHT

2007
DEERE & COMPANY
Moline, Illinois
All rights reserved
A John Deere ILLUSTRUCTION

Manual
Previous Editions
Copyright

2003, 2004, 2005, 2006
i 081407
PN=1
To Next Page
Loading...
Need help?
General
