Safety—Operating Precautions
OUT1739,00001C2 –19–05AUG02–1/1
Use Steps and Handholds Correctly
T133468 –UN–30AUG00
Prevent falls by facing the machine when you get on and
off. Maintain 3-point contact with steps and handrails.
Never use machine controls as handholds.
Use extra care when mud, snow, or moisture present
slippery conditions. Keep steps clean and free of grease
or oil. Never jump when exiting machine. Never mount or
dismount a moving machine.
OUT1739,00001C3 –19–05AUG02–1/1
Start Only From Operator’s Seat
T133715 –UN–07SEP00
Avoid unexpected machine movement. Start engine only
while sitting in operator’s seat. Ensure all controls and
working tools are in proper position for a parked machine.
Never attempt to start engine from the ground. Do not
attempt to start engine by shorting across the starter
solenoid terminals.
OUT1739,00001C4 –19–16JUN06–1/1
Use and Maintain Seat Belt
T133716 –19–14SEP00
Use seat belt when operating machine. Remember to
fasten seat belt when loading and unloading from trucks
and during other uses.
Examine seat belt frequently. Be sure webbing is not cut
or torn. Replace seat belt immediately if any part is
damaged or does not function properly.
The complete seat belt assembly should be replaced
every three years, regardless of appearance.
1-3-1 081407
PN=14
To Next Page
Loading...
Need help?
General
