16
NiMH
NiCd
Charge The charger will charge NiMH and NiCd batteries using the charge current set
by the user.
Auto Charge
In this program the user selects the maxium current and the charger will
optimize the charge rate up to that current, depending on the internal resistance
of the battery.
Discharge This mode is for discharging NiMH/NiCd battery.
Re-Peak
In re-peak charge mode, the charger can peak charge the battery once, twice
or three times in a row automatically. This is good for con rming the battery is
fullly charged, and for topping o previously charged battery packs.
Cycle
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is
operable for battery refreshing and balancing to stimulate the battery’s activity.
Pb Charge This mode is for charging Pb battery.
Discharge This mode is for discharging Pb battery.
Warning
Caution
BEFORE YOU BEGIN CHARGING YOUR BATTERY, MAKE SURE YOU HAVE
READ AND UNDERSTAND ALL OF THE WARNINGS AND SAFETY INFORMA
TION CONTAINED ON PAGES 37
DURING CHARGING/DISCHARGING, THE BATTERY SHOULD BE PLACED
INSIDE A FIRE PROOF/RETARDANT BAG AND ON A FIRE PROOF SURFACE,
AWAY FROM OTHER COMBUSTIBLE OBJECTS.
Charger Operations Continued
To Next Page
Loading...
Need help?
General
