Appendix A: Access to the Ewon Cosy+ 22 (32)
1. Launch eCatcher and log into your Talk2M account.
► To download and install eCatcher, please refer to eCatcher, p. 4
► In case you do not have a Talk2M account yet, click on Create a Free+ Account and
follow the prompts on the screen. Once you’ve created the Talk2M account, an email
will be sent with the activation link and instructions.
2. Click on the icon +Add to add the Ewon Cosy+ to your Talk2M account.
3. Follow the screen prompts.
► Be aware that some options require the full telephone number, county code included
4. Copy the <Activation Key> to the clipboard in the last step of the wizard. You will need it
later during the Talk2M wizard of the Ewon Cosy+ configuration.
The Ewon Cosy+ is now successfully listed in the <Ewon list> of eCatcher.
A.3 Access the Web Configuration Interface
The configuration of the Ewon Cosy+ can be done using its embedded web interface.
As your computer is connected to a LAN port of the Ewon Cosy+, open an Internet browser and
enter the LAN IP address of the Cosy+ in to the address field.
If the computer is not in the same network address range as the Ewon Cosy+, its web pages can
be reached using the EZ DHCP feature of the eBuddy utility. For more information, refer to.
eBuddy from the Related Documents, p. 3
Before beginning the configuration of the Ewon Cosy+, authentication is required.
The default login and password are both adm.
At first boot or after a reset level 2 of the Ewon Cosy+, and after successfully logging in, a prompt
will appear to set the interface language.
A second prompt will ask you to change the adm default password.
A.3.1 Language Selection
As you log in to the Ewon Cosy+ web interface, a window prompts and asks for the language of
the interface: English, Spanish, French, German or Italian.
The language selection is also requested after a reset level 2 operation. A reset level 2 is a factory
reset of the Ewon Cosy+.
You can change the language of your Ewon Cosy+ by browsing to Setup ► System ► Main ►
General ► Language. The language modification induces a reboot of the Ewon Cosy+.
A.3.2 Password Modification
As long as the password of the adm user remains adm (e.g.: on very first login or after a reset
level 2), the Ewon Cosy+ will ask you to change this password.
Ewon Cosy+ User Manual
UM-0005-00 1.0 en-US
To Next Page
Loading...
