Configuring Remote Access in Netbiter Argos 8 (22)
3 Configuring Remote Access in Netbiter Argos
3.1 Activating Remote Access Mode
On the Management page, select Configuration (in Manage and Analyze accounts you also
have to select a system) and enable Use this system for remote access.
Fig. 4 Enabling Remote Access
The Configuration page will now only contain one tab, Gateway settings, which contains
settings for the Remote Access service and for LAN configuration.
Fig. 5 Gateway settings tab
Netbiter
®
Remote Access User Manual Doc ID: HMSI-27-240 Version: 2.0
To Next Page
Loading...