QuickConnect 19 (22)
4.2.6 Adding Channels
When the tunnel between the computer and the remote device has been set up, add the
desired channels to the configuration by clicking Add new channel.
Fig. 28 Adding channels
There are no limitations as to the number of channels of different types that can be added
to a tunnel. This makes it possible to gather all the connectivity required for a device in a
single configuration.
Fig. 29 One TCP channel and two serial channels in a single tunnel
Netbiter
®
Remote Access User Manual Doc ID: HMSI-27-240 Version: 2.0
To Next Page
Loading...