14
9 Switch-off and cleaning the machine
9.1 Switch-off
– Close hood, push and hold Drain-button
➂
for 2 secs.
NOTE: During the drain cycle, the interior of the machine is
cleaned automatically. A final inspection is recommended to
remove coarse soil.
– When Drain-button goes off, switch off main switch or unplug
and close shut off valve at site!
9.2 Cleaning (daily)
– Open hood and take out rack guides.
– Take out strainers and flush.
– Clean interior of machine.
– Put strainers and rack guides back into place.
– Leave hood open for ventilation.
9.3 Cleaning (weekly)
– Take out rack guides.
– Take out wash and rinse arms.
Use the strainer as a spanner to loosen the hexagon screw (1)
by turning it counter-clockwise (2).
– Open plugs of wash and rinse arms and flush.
– Put all parts back into place.
1
2
To Next Page
Loading...
