15
10 Refilling the softener with salt
Only for machines with optional built-in softener.
– When the Salt required
➆
indicator illuminates, the softener
has to be filled with regeneration salt.
– Wait until the wash program is finished.
– Open hood.
– Unscrew the softener lid and fill the softener with 2 kg of
"Granular salt" (do not use salt tablets).
Clean seal and rim of softener lid carefully, before closing
the lid.
– Close lid and tighten.
The Salt required indicator
➆
goes off with delay.
11 Frost prevention
In case of frost or longer operation pauses (e.g. for seasonal
operations) the machine must be completely drained.
This should be carried out by after sales service.
Reset for operation:
– Open hood, push Program button
➃
and Drain button
➂
simultaneously until at the temperature indicator Rinse
➅
"boF" appears.
– Push Start button
➁
(at the temperature indicator Wash
➄
appears "- - 1") and hold until water come out of booster
overflow.
– Close hood.
The machine switches off and is now ready for operation.
12 Maintenance
For trouble free operation we recommend you enter into a service
contract with your local Service Office.
To Next Page
Loading...
Need help?
General
