EasyManuals Logo

Hobart AMXXT Series User Manual

Hobart AMXXT Series
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
13 Faults
The Service indicator
illuminates and the temperature indicator
Rinse
displays a code: e.g. "AL" = drain fault.
Possible types of fault as follows (report the code of fault to the
service technician):
14 Troubleshooting guide
TYPE OF FAILURE POSSIBLE CAUSE REMEDY
Poor wash result
Dishes are not clean. Wash arms stiff (you should be able Take out wash arms and clean them thoroughly.
to turn them easily by hand). Check water outlet from machine to wash arms is
clear.
Wash arm nozzles are clogged Take out wash arm, remove cleaning cap and
(visual check). rinse wash arm thoroughly until soil is removed.
Replace correctly.
Rinse arm nozzles are clogged Remove rinse arms and decalcify them in
(possibly by lime deposit). separate container.
Detergent concentration is too low or Check setting of detergent concentration
too high. See also operating instructions point 6.
Coarse strainer soiled. Take out strainer, empty and clean it.
Fine strainer soiled or obstructed Take out fine strainer. If heavily soiled soak in a
by lime. vinegar solution. Then clean it thoroughly until
the pores are free.
Cleaning is to be done daily (see operating
instructions).
Wrong programme selected for heavily Select programme with longer wash cycle.
soiled dishes.
CODE POSSIBLE CAUSE MEASURES
FIL Shut-off valve is closed. Open shut-off valve at site and switch on machine again.
Fill valve or fill system defective. Call the after sales service.
FIL +
Exceeded fill time. Call the after sales service.
AL Drain hose blocked. Clean drain hose and restart drain cycle.
Drain system defective. Call the after sales service.
UL Drain hose blocked. Clean drain hose and restart drain cycle.
Fill system or drain system defective. Call the after sales service.
F01 Temperature probe "rinse booster" defective. Call the after sales service.
F02 Temperature probe "tank" defective. Call the after sales service.
HEI Rinse booster heating defective. Maybe restricted operation possible – call the
after sales service.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobart AMXXT Series and is the answer not in the manual?

Hobart AMXXT Series Specifications

General IconGeneral
BrandHobart
ModelAMXXT Series
CategoryDishwasher
LanguageEnglish

Related product manuals