Hobart Handler 125 - Wire Spool Installation; Installing Wire Spool and Hub Tension

OM-947 Page 16
5-5. Installing Wire Spool And Adjusting Hub Tension
When a slight force is needed
to turn spool, tension is set.
1/2 in.
Tools Needed:
Ref. 802 971-C / 803 012 / 803 013 -B
Installing 8 in. (203 mm) Wire Spool
Installing 4 in. (102 mm) Wire Spool
When a slight force is needed
to turn spool, tension is set.
Retaining ring used
with 8 in. (203 mm)
spool only.
Adapter used with
8 in. (203 mm)
spool only.
. Only applies to units equipped with
optional hub kit.