10. Built-in devices
119
Selecting the type of energy *
• Use the adjusting knob / pushbutton to select the desired type of
energy.
• Press the adjusting knob / pushbutton to conrm the temperature.
Selecting the fan speed
• Use the adjusting knob / pushbutton to select the desired fan
speed.
• Press the adjusting knob / pushbutton to conrm the temperature.
The menu item “Select type of energy” will be depicted
when a heating system that uses electric heating rods
has been connected (optional extra).
The menu item “Select fan speed” will be depicted
when the heating / hot water temperature has been set.
Activating the timer (ON)
• Use the adjusting knob / pushbutton to activate the timer (ON).
• Press the adjusting knob / pushbutton to conrm the time
entered.
Deactivating the timer (OFF)
• Press to switch to the setting mode.
• Use the adjusting knob / pushbutton to deactivate the timer
(OFF).
• Press the adjusting knob / pushbutton to conrm the time
entered.
The timer will continue to remain active, even for several
days, until it has been deactivated (OFF).
The icon for the timer will blink when the timer has been
programmed and is active.
Setting the time
• The hours blink.
• Use the adjusting knob / pushbutton to set the hours (24-hour
mode).
• After pressing the adjusting knob / pushbutton once again, the
minutes will blink.
• Press the adjusting knob / pushbutton to conrm the time
entered.
To Next Page
Loading...