Using the device 39
TURNING ON AND OFF IN BATTERY MODE
If the device is powered by the optionally available
powerpackpoint 2, press the ON/OFF key to switch it
on. To switch the device off, press and hold the ON/
OFF key for more than 3 seconds.
In standby mode the device automatically switches
itself off after 1 minute.
STANDBY MODE
If the blower is switched off, the device switches to
standby mode (discernible on the lit display with date
and time).
The point 2 can be kept in standby mode permanently.
This does not harm it.
If the powerpackpoint 2 is fi tted on the device, the
batteries are charged in standby mode. The charg-
ing process is indicated by a fl ashing battery symbol
on the display.
E .9'!*H
<<L?@
=@ % ;D
<<L?@
=@ *<=
.!00EH