68 Device functions
P-Max
(only point 2 AutoCPAP in APAP mode)
Selection of P-Max by the physician
1. First set P-Min.
2. Use the selection keys
and to set the
desired value. Confi rm your setting by pressing
the enter key
.
The parameter P-Start is set next.
P-Start
(only point 2 AutoCPAP in APAP mode)
Selection of P-Start by the physician
1. First set P-Min and P-Max.
2. Use the selection keys and to set the
desired value. Confi rm your setting by pressing
the enter key .
4%/!*1
Q 4MMMMMM < ; ;$
Q /./MMMM B @$
4%/!*1
To Next Page
Loading...
