Manufacturer’s declaration on electromagnetic compatibility 111
MANUFACTURER’S DECLARATION ON ELECTROMAGNETIC
COMPATIBILITY
Guidance and manufacturer‘s declaration – electromagnetic emissions
The point 2 is intended for use in the electromagnetic environment specifi ed below. The user of the
point 2 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment –guid-
ance
RF emissions CISPR 11 Group 1
The point 2 uses RF energy only for its
internal function. Therefore, RF emis-
sions are very low and are not likely to
cause any interference in nearby elec-
tronic equipment.
RF emissions CISPR 11 Class B
The point 2 is suitable in all establishments,
including domestic establishments and
those directly connected to the public low
voltage power supply network that sup-
plies buildings used for domestic purposes.
Harmonic emissons
IEC 61000-3-2
Class A
Voltage fl uctuations / fl icker
emissions IEC 61000-3-3
Complies
To Next Page
Loading...
