56 Device functions
WAKE UP TIME
To activate the wake up alarm, press . For check-
ing purposes, the programmed wake up time is dis-
played for a short time. To deactivate the alarm, press
. The activated alarm is indicated by a bell symbol
on the display.
When the wake up alarm sounds, there are two options:
1. Press the ON/OFF key once to stop the alarm for
the next 5 minutes (Slumber mode) and twice to
deactivate it completely.
2. Press to end the alarm.
Setting the wake up time
1. Press the enter key for 1 second.
2. Use the selection keys and to select
Wake Time.
3. Press the enter key and then use the selec-
tion keys and to set the hour. Confi rm
your setting by pressing the enter key .
4. Use the selection keys and to set the
minutes. Confi rm your setting by pressing the
enter key .
4%/!*1
Q'!%)!MM ; BL ; ;
.!00EH
<=L=;
=@ *<=
(1)!.MMMMMMMMMM ?L ?@
.!00EH