Device functions 67
P-Min
(only point 2 AutoCPAP in APAP mode)
Selection of P-Min by the physician
1. Select the complete menu (see page 45).
2. Use the selection keys
and to select
Mode.
3. Press the the enter key and if necessary,
input the PIN code with the selection keys
and . Press the enter key after every digit.
4. Use the selection keys and to select
the APAP mode.
5. Press the selection key . The menu item
P-Min is now displayed.
6. Press the enter key and then use the selec-
tion keys and to set the desired value.
Confi rm your setting by pressing the enter key
.
The parameter P-Max is set next.
4%/!*1
Q
%
*MMMMMMMM @ ;$
To Next Page
Loading...
