Using the device 43
Proceed as follows when using oxygen:
If the device is in standby mode or switched off,
the oxygen supply must always be switched off.
1. Before starting the treatment, check that the
tube connections are fi tted correctly.
2. Switch the device on fi rst and then start the oxy-
gen supply.
3. Check whether the automatic mode is set to
„Auto OFF“. If not, program it as described on
page 77.
4. Switch off the oxygen supply before switching off
the device.
Using oxygen infl uences the therapy pressure.
Therefore we recommend to inclose oxygen in
the therapy pressure determination / titration pro-
cess, for every patient who‘s therapy is intended
to include an oxygen supply.
To Next Page
Loading...
