Device functions 59
point 2 AutoCPAP and point 2 BILEVEL ST20:
1. Select the complete menu (see page 45).
2. Use the selection keys
and to select
Mode.
3. Press the the enter key
and if necessary,
input the PIN code with the selection keys
and . Press the enter key after every digit.
4. Use the selection keys and to select
the CPAP mode.
5. Press the selection key . The menu item
Press. is now displayed.
6. Press the enter key and then use the selec-
tion keys and to set the desired value.
Confi rm your setting by pressing the enter key
.
To Next Page
Loading...
