Hoffrichter CPAP - Page 74

74 Device functions
Setting the ramp
1. Select the complete menu (see page 45).
2. Use the selection keys
and to select
Ramp.
3. Press the enter key
and then use the selec-
tion keys and to set the minutes (Ramp).
Confi rm your setting by pressing the enter key
.
4. Use the selection keys and to set the
desired value for the initial pressure (P-Ramp).
Confi rm your setting by pressing the enter key
.
Prescribed pressure: 10 hPa (mbar)
Pressure
[hPa]
Mask test Programmed soft start (0 - 45 min)
0 - 90 s
45
The pressure is increased gradually to
the prescribed therapy pressure (point 2
CPAP) or P-Start (point 2 AutoCPAP)
Time [min]