82 Device functions
Parameter Settings range Dependency Setting steps
Ramp 0 – 45 min - 5 min
P-Ramp 4 hPa – 20 hPa CPAP: Press.
APAP
6
: P-Start
0.5 hPa
Mask Test 0 – 90 s - 5 s
Auto OFF, Start/Stop, Start - -
Display Vt ON, OFF - -
Bact.Filter Yes, No - -
Brightness 0 – 100 % - 10 %
1 only point 2 CPAP and point 2 AutoCPAP and point 2 BILEVEL ST20 in modes CPAP
2 only point 2 BILEVEL ST20
3 only point 2 BILEVEL ST20 in modes BILEVEL T and ST
4 only point 2 BILEVEL ST20 in BILEVEL ST mode
5 only point 2 BILEVEL ST20 in BILEVEL S mode
6 only point 2 AutoCPAP
To Next Page
Loading...
