Using an SD card 93
Error code Meaning Remedy
E00
Writing data has failed. Possible
causes are power failure, removal of
card during writing or a faulty SD card.
The SD card is probably faulty. Remove
the SD card and then insert it into
the device again. If the error contin-
ues to occur, send the card back to
the physician.
E01 The SD card is faulty. Obtain a new SD card from your phy-
sician or specialist dealer.
E02
File system or folder structure is faulty
or cannot be read.
The SD card must be formatted by
the physician using TRENDset.
E03
New fi les cannot be created or the
SD card is full.
The SD card must be formatted by
the physician using TRENDset.
E04
The device cannot adopt the ther-
apy data.
The SD card must be returned to the
physician to check the therapy.
E05 The SD card was removed. Insert the SD card again.
The SD card has fallen out of the card
slot.
If this occurs frequently, the device
should be examined by a service
technician.
E06 The SD card or the device is faulty.
Change SD card. If this occurs fre-
quently, the device should be exam-
ined by a service technician.
W00
The device is attempting to repair the
SD card. But you have inserted a new
SD card into the device.
Confi rm with key. The old SD card is
defective. Continue to use the new
SD card.
W05/06 see error code E05/E06 see error code E05/E06
To Next Page
Loading...
