Some of the special features provided by the HT-IDE3000 include:
®
Emulation
·
Real-time program instruction emulation
®
Hardware
·
Easy installation and usage
·
Either internal or external oscillator
·
Breakpoint mechanism
·
Trace functions and trigger qualification supported by trace emulation chip
·
Printer port for connecting the HT-ICE to a host computer
·
I/O interface card for connecting the user¢s application board to the HT-ICE
·
OTP writer hardware integrated within the HT-ICE
®
Software
·
Windows based software utilities
·
Source program level debugger (symbolic debugger)
·
Workbench for multiple source program files (more than one source program file in one
application project)
·
All tools are included for the development, debug, evaluation and generation of the final
application program code (mask ROM file and OTP file)
·
Library for the setting up of common procedures which can be linked at a later date to other
projects.
·
Simulator can simulate and debug programs without connection to the HT-ICE hardware
·
Virtual Peripheral Manager (VPM) simulates the behavior of the peripheral devices.
·
LCD simulator simulates the behavior of the LCD panel.
Holtek In-Circuit Emulator - HT-ICE
Developed alongside the Holtek 8-bit microcontroller device range, the Holtek ICE is a fully func-
tional in-circuit emulator for Holtek¢s 8-bit microcontroller devices. Incorporated within the system
are a comprehensive set of hardware and software tools for rapid and easy development of user
applications. Central to the system is the in-circuit hardware emulator, capable of emulating all of
Holtek¢s 8-bit devices in real-time, while also providing a range of powerful debugging and trace fa-
cilities. Regarding software functions, the system incorporates a user-friendly Windows based
workbench which integrates together functions such as program editor, Cross Assembler, Cross
Linker and library manager. In addition, the system is capable of running in software simulation
mode without connection to the HT-ICE hardware.
HT-ICE Interface Card
The interface cards supplied with the HT-ICE can be used for most applications, however, it is pos
-
sible for the user to omit the supplied interface card and design their own interface card. By includ
-
ing the necessary interface circuitry on their own interface card, the user has a means of directly
connecting their target boards to the CON1 and CON2 connectors of the HT-ICE.
132
I/O Type MCU
To Next Page
Loading...
Need help?
General
