4 - 12
Scan Presentation Centering On, then scan one of the following bar
codes to change the top, bottom, left, or right of the centering window.
Then scan the percent you want to shift the centering window using digits
on the inside back cover of this manual. Scan Save.
Default Presentation
Centering = 40% for Top and Left, 60% for Bottom and Right.
In-Stand Sensor Mode
This feature senses when the scanner is removed from the stand and tells it to
begin manual triggering. When Sensor On is enabled, the scanner defaults to
Streaming Presentation Mode when it is in the stand, and to Manual Trigger
Mode when it is removed from the stand.
Default = Sensor On.
Note: If you are taking images (see Imaging Commands beginning on page 8-
1), you must set the In-Stand Sensor to Off.
Left of
Presentation Centering
Window
Top of Presentation Centering
Window
Right of Presentation Centering
Window
Bottom of Presentation
Centering Window
* Presentation Centering Off
Presentation Centering On
To Next Page
Loading...
Need help?
General
