6 - 6
For example, B501021F inserts an “A” on a 104 key, U.S. style
keyboard. B5 = the command, 01 = number of keys pressed (without
the key modifier), 02 is the key modifier for Shift Right, and 1F is the “a”
key. If a lower case “a” were to be inserted, B501001F would be
entered.
If there are three keystrokes, the syntax would change from B5xxssnn
for one keystroke to B5xxssnnssnnssnn. An example that would insert
"abc" is as follows: B503001F00320030F833.
Note: Key modifiers can be added together when needed. Example:
Control Left+Shift Left = 11.
Move Commands
Move the cursor forward a number of characters
F5 Move the cursor ahead “nn” characters from current cursor position.
Syntax = F5nn
where nn is the numeric value (00-99) for the number
of characters the cursor should be moved ahead.
Move the cursor backward a number of characters
F6 Move the cursor back “nn” characters from current cursor position.
Syntax = F6nn
where nn is the numeric value (00-99) for the number
of characters the cursor should be moved back.
Move the cursor to the beginning
F7 Move the cursor to the first character in the input message.
Syntax =
F7.
Move the cursor to the end
EA Move the cursor to the last character in the input message.
Syntax =
EA.
Search Commands
Search forward for a character
F8 Search the input message forward for “xx” character from the current
cursor position, leaving the cursor pointing to the “xx” character.
Syntax = F8xx
where xx stands for the search character’s hex value for
its ASCII code.
Refer to the ASCII Conversion Chart (Code Page 1252), beginning on
page A-4 for decimal, hex and character codes.
Control Left 10
Control Right 20
Key Modifiers
To Next Page
Loading...
Need help?
General
