Honeywell 1900GHD-2 User Manual

3 - 8
Base Power Communication Indicator
To display the power indicator on a base or an Access Point, scan the Base
Power Communication Indicator On bar code. To turn off the power indi-
cator, scan the Off bar code.
Default = On .
Reset Scanner
Scanning this bar code reboots the scanner and causes it to relink with the
base or Access Point.
Scanning While in Base Cradle
Note: This feature does not apply to the Access Point.
* Base Power Communication
Indicator On
Base Power Communication
Indicator Off
Reset Scanner

Honeywell 1900GHD-2 Specifications

General

Brand	Honeywell
Model	1900GHD-2
Category	Barcode Reader
Language	English