Honeywell 1900GHD-2 User Manual

1 - 7
2. Make sure the cables are secured in the wireways in the bottom of the
cordless base and that the base sits flat on a horizontal surface.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a bar code
from the Sample Symbols in the back of this manual. The scanner
beeps once.
For further RS485 settings, refer to RS485, page 2-2.
Cordless Base
RS485
Connection:

Honeywell 1900GHD-2 Specifications

General

Brand	Honeywell
Model	1900GHD-2
Category	Barcode Reader
Language	English