Honeywell 4850DR Guide

6 - 44
codes were created (see ISO 2022/ISO 646 Character Replacements on page A-8), and scan the value and the Save bar
code from the Programming Chart on the inside the back cover of this manual. The data characters should then appear
properly.
Chinese Sensible (Han Xin) Code
< Default All Han Xin Settings >
Han Xin Code On/Off
Han Xin Code Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description (page 6-1) for additional
information. Minimum and Maximum lengths = 1-7833. Minimum Default = 1, Maximum Default = 7833.
Aztec Code Page
On
* Off
Minimum Message Length
Maximum Message Length

Honeywell 4850DR Specifications

General

Brand	Honeywell
Model	4850DR
Category	Scanner
Language	English