Security (Cont'd)
16
SCREEN ACTION
3. Press the appropriate arming mode
button.
Note: If any zones are bypassed, a
Display Faults button will also be
displayed on this screen.
4. When prompted, enter the user code
authorized to access other partition(s).
If the user code is accepted, the system
displays the partitions that the user has
access to.
Note: A user may have access to some or
all of the available partitions.
You have two arming options:
• To arm one or more partitions,
highlight the partition(s) to be armed by
touching it on the screen, then press
ARM SELECTED.
• Press ARM ALL to arm all available
partitions.
• The screen changes to display the
remaining exit delay time, and the exit
delay time continues to count down to
zero.
To Next Page
Loading...
