Honeywell 6272CV - How to Arm Multiple Partitions

Security (Cont'd)
15
SCREEN ACTION
Arming (typical)
Armed (typical)
• The TouchCenter beeps twice (Away
and Night Maximum Modes) or 3 times
(Stay and Night Instant Modes)
• a DISARM button appears
• a text message appears stating which
zones are arming and whether or not
there is an entry delay
• the screen changes to display the
remaining exit delay time, and
• The exit delay time continues to count
down to one.
When exit delay time expires, the screen
automatically changes to indicate the
system is "Armed". The system is now
armed in the selected mode.
How to Arm Multiple Partitions
Note: Some systems may not have multiple partitions and the “Arm
Multi-Partitions” button may not be displayed.
To arm multiple partitions:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN ACTION
2. Press the Arm Multi-Partition button.