Setup (Cont'd)
55
Yes to the following prompt. Additionally, when using the
TouchCenter with a residential panel, the panel will download its
time into the TouchCenter once an hour after the clock is set.
• If Get Time is pressed, the TouchCenter will download the time
and date from the control panel and exit the Set Time & Date
screen. Note: This button appears with residential panels only.
• If DST On (Daylight Savings Time) is selected, the TouchCenter
will adjust for Daylight Savings time at the month, week and
time chosen.
Setting Daylight Savings Time
From the "Home" screen press the "Setup" button. Press the "System
Setup" button and do the following:
SCREEN ACTION
1. From the "System Setup" screen,
press the Time/Date Setup button. If
enabled, the "User Authorization"
screen is displayed with the
instructions "Enter Authorized
Code".
2. Enter your Authorized Code.
To Next Page
Loading...
