Honeywell 6272CV - Retrieving and Deleting a Voice Message

Voice Messages (Cont'd)
34
3. Press the Stop button when you are done recording the message.
The message indicator will be flashing and the message will be listed
in the message list window.
4. To record additional messages, repeat steps 2 and 3 above or to
exit, press the BACK or HOME button and the “Home” screen will be
displayed.
Retrieving and Deleting a Voice Message
To retrieve a voice message, do the following:
1. From the "Home" screen, press the MESSAGE button. The "Message
Center" screen is displayed.
SCREEN ACTION
2. Select the message you wish to listen
to by touching it in the message list and
then pressing the Play Message button.
As the message is being played, a “Play
(x): Voice Memo…” message is displayed
above the message list window.
When the end of the message is reached,
the playback will stop.
3. To listen to the next message, press
the Advance One Message and Play
button.
Note: At any time you may highlight a
message you want to listen to and press
the Play Message button as described in
step 2 above.
4. If you wish to delete messages, press
the Delete button. The “Delete Memo”
screen will be displayed. You can press
the Del Selected button to delete only the
currently selected message and return to
the “Message Center” screen, Del All
button to delete all messages and return
to the “Message Center” screen,
or the Cancel button to return to the
“Message Center” screen without deleting
any messages.
5. To exit, press the BACK or HOME
button and the “Home” screen will be
displayed.