Security (Cont'd)
20
SCREEN ACTION
The "User Authorization" screen is
displayed with the instructions "To
Bypass Zones, Enter Code".
Note: If zones have already been
bypassed, the top of this screen will
indicate “Ready Bypass”.
6. Enter your 4-digit user code.
The "More Choices" screen is displayed
showing the system status as Ready-
Bypass
7. Press the BACK button to return to the
“Arming”screen.
How to Remove Bypassed Zones
A bypassed zone will automatically be unbypassed when you disarm
the system. If a zone is bypassed, you can remove the bypass as
follows:
SCREEN ACTION
1. View bypassed zones by pressing the
SHOW ZONES button.
While the TouchCenter is requesting and
receiving the zone data from the control
panel, the screen displays "Please Wait!".
Then the zones, along with their current
status, are displayed.
To Next Page
Loading...
