Security (Cont'd)
21
SCREEN ACTION
2. Remove zone bypasses by pressing
the CLEAR BYPASSES button.
Note: Bypassed zones are indicated by
the Bypass icon
.
3. The "User Authorization" screen is
displayed with the instructions To Clear
Bypasses, Enter Code.
Note: If the system is armed and you
unbypass a zone, it will disarm the
system.
4. Enter your 4-digit user code. The
"More Choices" screen is displayed
showing the system as Ready to Arm.
Note: This will not occur if any zone(s) is
open (not ready).
5. Press the DISTRESSED ZONES
button.
The "More Choices" screen is displayed.
To Next Page
Loading...
