Security (Cont'd)
23
SCREEN ACTION
Note: If you have a commercial system
and a time window has been defined for
when you may disarm the system, the
system will not disarm if you are outside
that time window.
To disarm the system when already in the premises:
SCREEN ACTION
1. Press the DISARM button on the
"Armed" screen. The "User Authorization"
screen is displayed with the instructions
“To Disarm, Enter Code”.
2. Enter your 4-digit user code. If the Arm
Multi-Partitions button on the “Armed”
screen is not checked, the TouchCenter
beeps once, the system will disarm, and
the "Arming" screen is displayed showing
the system as Ready to Arm or Not
Ready Fault if any zone is faulted (open).
If the Arm Multi-Partitions button on the
“Armed” screen is checked, the Partition
No. & Description screen is displayed
listing the partitions to which you have
access.
To Next Page
Loading...
