EasyManua.ls Logo

Honeywell BC-200 - Specifications & Approvals; General and EMC Specifications

Honeywell BC-200
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications & Approvals
BC-200 Manual P/N DOC-01-013 11
4 SPECIFICATIONS & APPROVALS
4.1 GENERAL SPECIFICATIONS (SUBJECT TO CHANGE WITHOUT NOTICE):
Cabinet Zinc Sealed Steel
Powder Coated
Hinged Inner Door
Hinged Outer Door
Primary Microprocessor MC68EC000
Memory Type Non-volatile 16Mbit Flash; 1 Mbyte SRAM
Liquid Crystal Display LED Backlit 1/4 VGA graphical
Environmental Dry cold/heat: -10 °C to +55 °C
Damp heat: +40 °C @ 93% Relative Humidity.
IP Rating IP 30
4.2 EMC INFORMATION
WARNING:
This equipment may radiate radio frequency energy. It may also be affected by radio frequency energy and, if
not installed and operated in accordance with the manufacturer’s instructions, may cause interference to
radio communications. It has been tested and found to comply with the Class A radiated and conducted EMI
requirements of AS/NZ 3548:1995 (including Amendments 1 & 2) as well as the EMI susceptibility
requirements of Clause C3.5 in AS4428.0:1997.
CAUTION:
Radio communication devices should not be used in the vicinity of fire panels or associated ancillary devices
and systems.

Table of Contents

Related product manuals