Honeywell BC-200 - Compatible Devices; Compatible Batteries

Compatible Devices
BC-200 Manual – P/N DOC-01-013 16
5 COMPATIBLE DEVICES
5.1 COMPATIBLE BATTERIES
In general, any Sealed Lead Acid (SLA) battery, or Wet Lead Acid battery designed for stationary use is
compatible with the BC-200 Fire Indicator Panel. The use of Nickel Cadmium batteries is not recommended.
Manufacturer
Type
Number
Voltage
Capacity
(Ah)
Qty Required
Olympic Batteries SLA CJ12-7 12 7 2
Olympic Batteries SLA CJ12-12 12 12 2
Olympic Batteries SLA CJ12-18 12 18 2
Olympic Batteries SLA CJ12-26 12 26 2
Olympic Batteries SLA CJ12-33 12 33 2
Olympic Batteries SLA CJ12-40 12 40 2
Olympic Batteries SLA CJ12-85 12 85 2
Olympic Batteries SLA CJ12-100 12 100 2
NOTES:
Automotive batteries must not be used. There is a risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to Manufacturer Instructions
The use of Nickel Cadmium batteries is not recommended.
The batteries could be seriously and permanently damaged if they are permitted to discharge below 20V DC
when placed in series.
The NPS series of power supplies will only charge the battery if the terminal voltage is above 12V when
measured across 2 batteries in series.